Log in

View Full Version : Po 605 code on a ford powerstroke 7.3


jamesmurph40
Sep 28, 2011, 03:18 PM
What causes a PO 605 internal control module ROM error on a 1997 ford powerstroke 7.3?

thundermobilere
Sep 28, 2011, 03:54 PM
If you have a chip then the chip will cause this. If you have a chip is the vehicle doing anything funny? Any lights on? If not, then you are good to go, if so what other P codes are you seeing? Sometimes with certain chips you need to change the Bank 2 Oxygen sensor

CaptainRich
Sep 29, 2011, 06:28 PM
If you have a chip then the chip will cause this. If you have a chip is the vehicle doing anything funny? Any lights on? If not, then you are good to go, if so what other P codes are you seeing? Sometimes with certain chips you need to change the Bank 2 Oxygen sensor

You have no idea what you're talking about, do you?

thundermobilere
Sep 30, 2011, 09:42 AM
I have a lot of knowledge with what I am talking aboutI am a Master Mechanic on Power Strokes, and have seen many issues with these chips that 99% of the time cause the issue