illinois1
Aug 29, 2011, 10:25 AM
Any way to confirm problem before beginning to repair problem?
I have a shifter lever that is kind of sloppy in the steering column. I can't tell for sure what the problem is and I don't want to start in the wrong direction before I confirm what the problem is. My hypothesis is it's the cable needing to be adjusted on the trans shifter, the cable has too much play, or the shifter spring and lever are just wore out or maybe a screw loose on the mount to the steering column.
It shifts fine and the position for the P R N D 3 L is correct in regards to the shifter lever location and the dash light for each transmission position is correct.
The shifter is moving back and forth to easily and it seem loose when it is in the proper transmission position.
I think it is the shifter but I wanted to confirm before I do anything to fix it. My first guess was to reset the trans shifter cable which is not difficult but I didn't want to do that if its not the problem. Then if that didn't work I was going to replace the shifter. The cable seems like it may have a bit of looseness but because the problem seems more in the spring on the shifter when you pull it to move to the next position also when in neutral and drive you can slide it back and forth fine for each gear but the handle just seems sloppy that's why I'm leaning toward replacing the handle but I have no way to rule out the cable or position of shifter on the trans. My gut tells me it's the shifter can anyone confirm or give proper procedure for solution to problem.
I have a shifter lever that is kind of sloppy in the steering column. I can't tell for sure what the problem is and I don't want to start in the wrong direction before I confirm what the problem is. My hypothesis is it's the cable needing to be adjusted on the trans shifter, the cable has too much play, or the shifter spring and lever are just wore out or maybe a screw loose on the mount to the steering column.
It shifts fine and the position for the P R N D 3 L is correct in regards to the shifter lever location and the dash light for each transmission position is correct.
The shifter is moving back and forth to easily and it seem loose when it is in the proper transmission position.
I think it is the shifter but I wanted to confirm before I do anything to fix it. My first guess was to reset the trans shifter cable which is not difficult but I didn't want to do that if its not the problem. Then if that didn't work I was going to replace the shifter. The cable seems like it may have a bit of looseness but because the problem seems more in the spring on the shifter when you pull it to move to the next position also when in neutral and drive you can slide it back and forth fine for each gear but the handle just seems sloppy that's why I'm leaning toward replacing the handle but I have no way to rule out the cable or position of shifter on the trans. My gut tells me it's the shifter can anyone confirm or give proper procedure for solution to problem.