Is there a reset button for kenmore dishwashers?

The need for resetting may indicate a mechanical problem that needs addressed, but as for answering your question, this will work for most Kenmores for resetting the panel:

1. Press and hold the "Heated Dry" button on your Kenmore dishwasher for four seconds to unlock the dishwasher control panel.

2. Press the "Heated Dry," "Normal Wash," "Heated Dry" and "Normal Wash" buttons one after the other, in fairly quick succession.

3. Wait for the dishwasher to run a short diagnostic test.

4. Press the "Cancel/Drain" button at the end of the diagnostic test cycle. This should reset the control panel on your Kenmore dishwasher.