Log in

View Full Version : Craftsman Automated garage door opener model # cannot find?


theresawiid
Jun 23, 2011, 11:08 AM
Hi can u help me my garage opener just won't open or close via the remote or the main switch... the sensor lights are on one green the other kind of yellow orange ,checked the fuses they OK on the main circuit board the light bulb comes on when I click the remote or the main switch, but nothing no sound nothing ,I did notice once the light goes off and I walk pass the sensor the light does not come on and at the back where your program the rmote on the opener there is a small light that blinks all the time

Stratmando
Jun 23, 2011, 04:13 PM
I would try turning off breaker or unplugging for 15 seconds or so, then back on and check out the light, you may have to relearn your remotes or keypads, do you have a model number?

Devin1212
Sep 22, 2011, 05:06 AM
I think you can take help of locksmiths. Sometime they even have solution for such kind of problems



24 hour locksmith San Diego
(http://www.carkeylocksmith-san-diego.com/)

Stratmando
Sep 24, 2011, 06:08 AM
I think a Technician or Electrician should be able to figure it out over a Locksmith.
If the Door was closed and you can't get in, then Locksmiths have a bypass for Garage Doors.