Model: FEFB9200ES0
Type: Electric Front Loading Dryer

Problem: When pressing the power button, I here a single beep, but no movement.

Tried: Pressing cancel two times, Switching cycles

Analysis:
All the lights in the front turn on. All the buttons when pressed make beeps, which means there is contact with the circuit. This is the third time this happened. After some time it just starts working.

Any help is appreciated. :confused:

I think I found the problem. Since the panel runs on 110 and motor runs on 220v, it might be that the 220 phase is dropping out. I will check power cord and connections tonight and update this post for anyone else that has a similar problem in the future.