belsunbaby
Feb 8, 2011, 03:22 AM
Hi :)
I haven't managed to get any image from my 30 LED CCTV through the VCR to the TV. Its Validity pixel is PAL 628*582, NTSC 510*492 or 380 TV Line. Ive put the TV on 4:3 instead of 16:9 and the best I've managed to see when I tune the vcr channel is fuzzy blackness and with no vertical hold to adjust, I can't stop what could be the picture from spinning upwards continuously. Auto tuning the vcr channels using D/K instead of B/G gets clearer audio but the image just won't appear. There is no image when I plug it directly into the TV and I've tried on 2 older TVs but still no luck. No picture while image is being recorded or on tape playback.
Is my Australian LED HDTV compatible with this chinese camera? It came with no instructions and after trawling wikipedia I have a fair grasp on it all, just no video...
Thanks heaps, Bel :)
I haven't managed to get any image from my 30 LED CCTV through the VCR to the TV. Its Validity pixel is PAL 628*582, NTSC 510*492 or 380 TV Line. Ive put the TV on 4:3 instead of 16:9 and the best I've managed to see when I tune the vcr channel is fuzzy blackness and with no vertical hold to adjust, I can't stop what could be the picture from spinning upwards continuously. Auto tuning the vcr channels using D/K instead of B/G gets clearer audio but the image just won't appear. There is no image when I plug it directly into the TV and I've tried on 2 older TVs but still no luck. No picture while image is being recorded or on tape playback.
Is my Australian LED HDTV compatible with this chinese camera? It came with no instructions and after trawling wikipedia I have a fair grasp on it all, just no video...
Thanks heaps, Bel :)