Log in

View Full Version : 1982 toyota tercel no spark.


robalvin
Jan 18, 2011, 09:42 AM
I replaced ignition module and coil. Coil gets 12v between positive terminal on coil and ground. I measure 1.2v going from ignition module to distributer. Any answers.

Thanks,
Rob

TxGreaseMonkey
Jan 18, 2011, 10:58 AM
Did you replace the ignition condenser? Was the ICM new (very expensive) or used? It should be pretty straight-forward. I suspect there's an issue with the ICM.

kitch428
Jan 18, 2011, 11:15 AM
Is the cam turning?

robalvin
Jan 18, 2011, 12:46 PM
Didn't replace ignition condenser. The ICM and coil are new.

robalvin
Jan 18, 2011, 12:46 PM
Yes

robalvin
Jan 18, 2011, 05:49 PM
What is the voltage between the ignition module and distributer