Log in

View Full Version : Is there a reset button on the aqua air water system tank model v60


kcrigger
Jan 15, 2011, 07:26 AM
We lost power, water pressure is very low.

jlisenbe
Jan 15, 2011, 10:33 AM
Two things:

1. Make sure you still have prime. Remove the plug (maybe a gauge) on top of the impeller housing of the pump. Should be filled with water. If not, pour in water until it overflows, then replace the plug.

2. See if your switch (little grey box with wires coming in/out) has a reset lever. Reset the switch if it does.