mmcl29
Jan 5, 2011, 08:00 PM
Recently the water flow to the shower head in stand up shpwer has slowed to a trickle. Thought it may be lime build up in the valve. ( Faucet type is 2 valve, hot and cold with shower riser) Turned the water off and removed the cartridges on both hot and cold. No obvious issue. While the cartridges were out flushed water through each side. Great flow... Reinstalled cartridges and still no flow to shower head. Shut off hot water and removed cartridge. Opened cold to flush through valve. Great flow. Did the same with cold, Great flow. Removed the showeer head and ran a wire dwn to see if I could feel a blockage. Nothing obvious.
I know this is probably a VERY simple problem, I just am having a real brain drain. Someone probably can tell me how to fix in 5 seconds and I will tell myself how stupid I am to not think of this...
I know this is probably a VERY simple problem, I just am having a real brain drain. Someone probably can tell me how to fix in 5 seconds and I will tell myself how stupid I am to not think of this...