I want to get the overhead light replaced for my Toyota Camry(1995).
There are no visible screws which can be unscrewed.I tried using a screwdriver and my thumbnails to pop it out but it does not work.

Can someone please suggest a better way of getting this done?

Thanks.
Ankesh

Check you owners manual or call a local Toyota dealers service department. They are very helful. The frosted lense cover is a "pry out" cover but check the manual first. If you pry in the wrong place it will break.

I want to get the overhead light replaced for my Toyota Camry(1995).
There are no visible screws which can be unscrewed.I tried using a screwdriver and my thumbnails to pop it out but it does not work.

Can someone please suggest a better way of getting this done?

Thanks.
Ankesh
This what I do. I get in the drivers seat, recline it almost all the way back, have a pocket screw driver in my hand and look for the little slot just enough to fit the tip of the screwdriver into. I think it's the pass side. It will pop out with a little pry. Have the switch in off position because this is where you can pop the fuse if you use any metal objects to pry out the bulb. Just try and spresd the contacts apart a bit and the bulb will fall out. Be ready to catch it!