My dish washer is not draining since a drinking glass broke inside. I picked broken pieces which were in the bottom. However, I believe more small glass pieces inside are blocking the drainage of water. I need to know how can I remove the entrapped pieces. It is Kenmore Ultra Wash III dish washer. Thanks in advance for your assistance.

All dishwashers as far as I know are pretty similar: take off the toe kick, grab the sides of the washer and slide it out (2 clips at the top may be attached to the counter), and take off the clamp or clip holding on the rubber drain hose. Remove it at the waste pipe or disposer end too if needed, and replace if glass is stuck.