So here is the deal I am a new DIYer and have come across something I can't seem to find an answer for.

I live in a home that was built in 1930. The toilet on the main floor of the house was leaking and the tank was cracked so I am trying to replace the whole toilet. I have replaced a toilet in other homes I have owned so this should have been no problem, right. But here is the problem... first off it seems the last person to have my house decided to jbweld the bolts. So I cut them to get the toilet out. When I cleaned off the wax ring I found that the closet ring is under the subflooring. Now without taking up the whole floor I can't seem to figure out how to get a new closet ring in. I really can not afford to redo the flooring at this time. I do plan to do a complete bathroom redo later this year but as I am a single mom of three that just got back to work after a bit of time money is beyond tight. Please someone tell me how to fix this.

You are saying closet ring so I think you mean closet flange. The flange should be flush with the flooring surface or it can be 1/8" higher. If the face of the flange is below the finished floor you use spacers. Approved Vendor 012751 Toilet Flange Spacer Ring (http://www.drillspot.com/products/338568/Approved_Vendor_012751_Toilet_Flange_Spacer_Ring)

Question: How low is it below the finished floor ?

There is an easy way of reinstalling new toilet:

1. You do not install new closet ring over existing one
2. Buy "Remodeling brass bolts" ( 3 1/2" long )
3. Insert bolts into closet ring slots
4. Buy Oatey's closet ring spacer kit and install as many of the spacers as you need
5. Put wax ring over the spacers
6. Set toilet
7. Tighten nuts
8. Cut of left over length of bolts
9. Caulk around the base of the bowl

And you are finished.

Let me know how you did... Milo