jelag
Oct 24, 2010, 11:11 AM
RE: 665.15829
Washer won't pump but the motor is running.. the drain hose has been removed and is clear... with the dishwasher off... water trickles out of pump discharge under the washer..
I've opened the top of the washer and have the impeller out. And related housings... all these parts are clear and clean...
I can't blow air back from the hose into the cabinet... its like there is a restriction in the discharge or there is a solenoid that isn't open...
When I removed the housing from the inside of the cabinet I've gotten 2 check balls out of the system which I thought were the outlet discharge check valves...
My question is... does this model made by Whirlpool use a discharge solenoid or does it reverse the pump to discharge the water... and if it reverses the pump is there a flapper type discharge check deeper in the unit...
Washer won't pump but the motor is running.. the drain hose has been removed and is clear... with the dishwasher off... water trickles out of pump discharge under the washer..
I've opened the top of the washer and have the impeller out. And related housings... all these parts are clear and clean...
I can't blow air back from the hose into the cabinet... its like there is a restriction in the discharge or there is a solenoid that isn't open...
When I removed the housing from the inside of the cabinet I've gotten 2 check balls out of the system which I thought were the outlet discharge check valves...
My question is... does this model made by Whirlpool use a discharge solenoid or does it reverse the pump to discharge the water... and if it reverses the pump is there a flapper type discharge check deeper in the unit...