Log in

View Full Version : Wooden fencing


Oneill474
Oct 11, 2010, 12:35 PM
I have a 10 foot section to be fenced. What spacing for the 4x4 post would be okay
to support the 2x 4 stringers ?

ma0641
Oct 11, 2010, 04:09 PM
We usually use 8 ft but here is a solution for 10'. Set the end posts where you want, use fence cleats to hold the 2X4 with the 3 1/2 " side out. Under the middle of the bottom 2X4, notch and cleat a small piece of 4X4 and set that in the ground about 1 ft. Almost invisible and supports well. I assume you will use 1X6 PT fence boards? I wish I knew how to draw and insert a picture!

yuriart10
Oct 18, 2010, 07:11 PM
I usually use 8 ft but here is a solution for 10'.


__________________
Watch Hereafter Online Free (http://moviesonlinefree.biz)

Oneill474
Oct 19, 2010, 08:05 AM
Thanks. I have joists hanger.the 2x4 fits perfectly. You could build the fence
elsewhere. And carry it over and drop it into the joist hangers.If you wanted to. Thanks

ma0641
Oct 19, 2010, 01:18 PM
HD and Lowe's sell fence panels to do the same. Glad the info was helpful, Brian