Newman101
Jan 1, 2007, 12:01 PM
I currently have a York heat pump with a Janitrol gas furnace.
Electromechanical 2H/1C with aux heat
X=Black
R=Red
W=White
Y=Yellow
G=Green
O=Orange
B=Blue
Honeywell VisionPRO TH8320U
X=C
R=Rc (Rc+R jumpered)
Y=Yellow
W=Aux
G=Green
O=O/B (code 190 set to 0)
B=Taped off. Not used.
I have no cross reference material for the VisionPro TH8320U. Are the above connections correct?
Electromechanical 2H/1C with aux heat
X=Black
R=Red
W=White
Y=Yellow
G=Green
O=Orange
B=Blue
Honeywell VisionPRO TH8320U
X=C
R=Rc (Rc+R jumpered)
Y=Yellow
W=Aux
G=Green
O=O/B (code 190 set to 0)
B=Taped off. Not used.
I have no cross reference material for the VisionPro TH8320U. Are the above connections correct?