View Full Version : What sparkplug can I use to replace a champion RDZ19H for a weed trimmer
niloc54
Sep 2, 2010, 07:55 AM
Troy bilt and MTD model 4 cycle weed trimmers use a champion spark plug RDZ19H. I cannot find any of these plugs in my area. Is there a replacement I can use for this type of plug.
Thank you in advance.
ma0641
Sep 3, 2010, 07:57 PM
A good small engine shop should have an interchangeable plug cross reference chart. By the way, Amazon has them for $7
niloc54
Sep 5, 2010, 06:17 AM
Hi thanks for the help, but I am in Canada and the shipping and customs from the states is a killer.
Thanks again.
ma0641
Sep 6, 2010, 07:35 PM
Is the other plug bad? If the reach of the plug(thread depth) and heat range of a similar plug are close, it probably would work. The manufacturer have any suggestions? I'd go to a small engine repair shop first, they make have the same make and model and be able to pull a plug for you. NILOC, send me a personal message and maybe we can work something else out if you can't resolve things in Canada. I have friends in Toronto and maybe we can do something .
RDZ19H/130-567.
Champion J17LM/130-571.
NGK B4LM/130-732.
DENSO SE-19J/130-211
niloc54
Sep 8, 2010, 09:56 AM
Thanks for the help, but I finally found a place I can order them from without prohibitive cost of shipping.
Thanks again.
DJMORAN
Jun 19, 2013, 01:56 PM
Hi I saw your I'm for on Amazon has enterchangeable plug crossreferance can you help me find this chart you said for 7.00$ I can't find thanks Dennis