I am replacing my shower's escutcheon, handle, etc.. What I've learned (no surprise to folks here) is that shower parts are like car parts... you have to know what you're dealing with to get the right parts. That's my problem. What do I have? See picture.

Sorry -- didn't attach picture -- attached here.

Hi Rreilly...

It looks exactly like a DELTA brand valve/faucet.

Take the picture with you to a local plumbing supply store... should be able to help you.

Mark

Hello Rreilly,

Open the link below I think this is your faucet, it will show you all the parts that you need, Thanks.

John

http://www.plumbingpartsdepot.com/delta600series.pdf

Thanks. I tried the Delta 600 but it was too small. Chasing a possible Valley faucet. I *think* my rough in valve is a Watco.

In that case follow Mark's advice, Take the picture or remove the parts that you need with you to a local plumbing supply store, some one will help you, Thanks.

John