View Full Version : Will this work?
silvertone
Aug 17, 2010, 02:26 PM
Im doing a small addition for myself and have a vague understanding of plumbing. This will be inspected I am just trying to see if this will meet code. Originally the washer just wyed into that 2" vent but I didn't think that looked right.Now Im questioning the shower/ lav venting. What do you guys think will this pass code here in NJ?
Thanks
speedball1
Aug 17, 2010, 04:21 PM
Hey Silver,
These tired old eyes are having a problem reading your drawing. Could you darken the lines and post again? Thanks, Tom
silvertone
Aug 17, 2010, 04:31 PM
No problem. I appreciate your help!
Another view, Thanks
speedball1
Aug 17, 2010, 04:45 PM
A fewn questions.
What code do you fall under and does it allow wet vents? Is this installation on a slab or is there a basement? Why them extra dry vent next to the washer since you already have it vented?
I'll wait on your reply. Cheers, Toim
silvertone
Aug 17, 2010, 04:53 PM
Hey Tom,
I think its IRC code here but I don't know about wet vents. This will be above a crawlspace. About the washer, well l geuss I should have said a very vague understanding of plumbing, I was a carpenter long ago:). I take it that I don't need that vent ? Lol which is great. Again I appreciate you taking your time.
Thanks
speedball1
Aug 17, 2010, 05:03 PM
This would pass inspection in my area. If it were a slab I'd request a 4" drain for the WC but my code ( SPC) allows 3" above ground,
Since you've wet vented the shower I would take my drawing down to the Building Department and ask. Good luck, Tom