I have replaced clutch slave and replace the clutch master kit... tried bleeding it but there is no pressure, How do I get pressure to build... also clutch pedal is stuck and won't retract.

Obviously, you have air in the system. With the clutch bleeder screw open, and the clutch pedal propped up, open the clutch master cylinder reservoir and pour brake fluid in until a solid stream comes out. Then, tighten the bleeder screw. An alternative is to get a pressure bleeder. You may need a manual to properly adjust the clutch pedal--otherwise, you can damage the clutch master cylinder.

This link may help:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-2.html#post232189