View Full Version : I am disabled and need to raise the base of my toiet so seat changes from 17
ALLANGUD
Apr 26, 2010, 09:20 PM
I am disabled and need to raise the base of my toiet from 17" seat height to 25"seat height to California residential code. How? I can not add to top of seat as I use a slide board so must be raised from base.
ALLANGUD
Apr 26, 2010, 09:32 PM
I want to pass California building residential code to raise my toilet height of the seat from 17" to 25" so it will be the height of my wheelchair so I can slide board across to the toilet--therefore the toilet raisers put on the top do not work. How can I add a platform or base at the bottom to get the height I need?
creahands
Apr 26, 2010, 11:01 PM
Build box from wall using 2x8's slightly larger then toilet base.
Rip 2x8's down to 6 3/4 inches. Extend toilet waste line. Use 2 layers 1/2 inch plywood or 1 layer plywood and 1 layer concrete board.
Finish with ceramic tile to match floor. Grout and install toilet.
This will give u 25 inches.
Good luck
Chuck
manhattan42
Apr 27, 2010, 03:33 AM
Change the toilet to one with a 25 inch seat height.
It will be the easiest option and cost the least.
CHayn
Apr 27, 2010, 04:07 AM
I am not aware of any toilets with a 25" seat height. The raised seat option must be a b**ch to keep clean. If there are toilets with this kind of height I would be interested in knowing what models they are.
Robert Gift
Apr 27, 2010, 04:44 AM
If no tall enough toilet is available, would a trapeze hanging from the ceiling work?
Hate to see you go to all the trouble and expense of raising a toilet.
Fr_Chuck
Apr 27, 2010, 07:39 AM
I work with handicap people every day, This is what I do for a living, what is done is a change to the seat or a stand with a seat and arms is placed over or attached to the current toilet.
We deliver and set up these every day
Milo Dolezal
Apr 28, 2010, 03:08 AM
What ADA / California Code are you exactly talking about ? We do lot of commercial plumbing in California but I am not aware of any requirement for 25" high toilets. Please, educate me...
Do as suggested above: build a box under the toilet to fit your needs. Also, Home Depot sells retrofit toilet seats. See if you can find one tall enough to fit your requirements.
hkstroud
Apr 28, 2010, 05:31 AM
Problem is OP says he has to use slide board, I can see the hesitation to use slide board on handicap seat. I say build the box.
Fr_Chuck
Apr 28, 2010, 05:41 AM
No, now not the cheap seats that merely sit on top of a toilet, but a real professional seat, it sits on four legs and sits over the toilet seat. There is a insert that goes down toward the bowl.
They can have a drop arm ( they have arms to help you transfer) and one side can drop down for the slide board.
They make equipment just for what he wants to do, obviously he is not talking to a medical supply dealer.
speedball1
Apr 28, 2010, 06:42 AM
Chuck,
a real professional seat, it sits on four legs and sits over the toilet seat. There is a insert that goes down toward the bowl.
Can you give the OP a link to this? Regards, Tom
Fr_Chuck
Apr 28, 2010, 06:52 AM
This is one of the models I place weekly. They also make a models if a person is over 350 lbs. They come without arms ( the most popular) and with arms and with drop arms.
They are used with slide boards ( when done properly)
Model 202 - MAX-AID Bathroom Assist Chair (http://www.activeaid.com/products/model_202.asp)
Milo Dolezal
Apr 28, 2010, 09:21 PM
Fr.Chuck: are these ADA approved ?