I just purchased a hampton bay carriage house II ceiling fan. As I installed each section, I checked and rechecked wires and fitament being careful not damage anything. When I turned on the fan, only 2 lights worked (opposite sides of each other). I removed the bulbs of the non working and replaced with new ones... nothing. I did this twice to rule out defective bulbs (which worked in the other two lamps). I took down the light fixture, rechecked all connections, reinstalled and nothing. As your looking at the pull chain for the light, it's the lamp to the right of it and the one opposite side that do not work. Any suggestions please would really be appreciated.
Thank you

Please disregard this question. I found an answer in the forum that helped.
Thank you