Log in

View Full Version : Why would touching a test lead to hot side of recept.cause interference to audio


CONTROLACE
Feb 14, 2010, 08:50 PM
How can just the test lead alone. Un connected to anything ,cause subwoofer to pop ? To me seems same as adding 24" of wire to hot connection. Same reaction with bare tip on screwdriver, etc.. Built in amp causeing some kind mag. Field? Antana type ?

KISS
Feb 14, 2010, 09:12 PM
You have just created a 60 Hz transmitter.

When a hot and a neutral run near each other or in a metal box some amount of shielding or cancellation takes place.

DanielF
Feb 14, 2010, 10:31 PM
Every mains wired house has an electromagnetic field radiated from the mains wiring. If you're in the USA it will be at 60Hz, or in the 'civilised' :-) world, 50Hz.

Any piece of metal (wire, screwdriver blade) acts as an antenna and picks up that 50/60Hz radiation (and a lot of its harmonics). So when you touch such an antenna to an audio amplifier input, the picked-up 'buzz' (fundamental plus harmonics) is amplified and makes a sound in the speaker.

Daniel