I am replumbing the laundry room in our house. I staged the fittings that I am planning on using to see if it is an okay setup. I am using a 2 inch vent (out the roof) and drain with combination tee wye fittings for the washing machine drain with a separate vent before draining vertically (also a separate sanitary tee for the sink). I am hoping this will provide excellent flow for the washing machine drain. Thanks for any pointers and checking my work/thoughts.

See attached image/link.

http://picasaweb.google.com/BriceBer...28355001721874

-Brick


Just realized I need to lose the 22.5s between the traps and vents because I would be creating S-Traps. Anything else?

Hi Brick...

Yup!~ Pull the 22.5 fittings and you have a perfect set up here... ;) Be sure to install a 30-36" standpipe into the washing machine ptrap, hang the pipes properly and keep pitch to about 1/4" per foot of pipe and you're good to go!

MARK