I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly appreciated.

Sounds logical to me but make sure you run the setup and do any switch changes for your type of system. If it uses batterys make sure to install them correctly and they are fresh/new.

Thanks! I hooked it up that way and it's working great.

No problem enjoy your new stst.