Log in

View Full Version : Plumbing


bmccormickmv
Jan 15, 2010, 01:16 PM
I have double sinks in the master bath. The sink I generally use had no water this morning! There was water last night. This morning I had water for the other sink, shower, kitchen, etc. but no water for this sink. Do you know what could have happened? (sinks have 2 handles, hot/cold)

massplumber2008
Jan 15, 2010, 04:23 PM
Hi Bm...

Start by unscrewing the aerator out of the end of the spout... probably clogged... ;) Once you have it unscrewed (unscrews counterclockwise) you want to run the water and if water flows well then you will clean the aerator and then reassemble and reinstall. Hopefully that's all there is to it.

Give it a shot and let us know how you make out... OK?

MARK