Tucek
Jan 12, 2010, 02:33 PM
Hello,
Details:
1949 house. 7/8" connector to toilet from supply line.
Replaced toilet guts - had to replace supply line.
As soon as the flex hose is connected, there is water pooling above the plastic (by the flex hose). The water has NOT been turned on yet.
We're using two flex hoses with an adapter in the middle so we can have 7/8" on each end. We have tried both of the new hoses on the water supply side and still the water pools.
Any ideas?
Can we use anything to stop the leaking?
Thanks,
Tucek
Details:
1949 house. 7/8" connector to toilet from supply line.
Replaced toilet guts - had to replace supply line.
As soon as the flex hose is connected, there is water pooling above the plastic (by the flex hose). The water has NOT been turned on yet.
We're using two flex hoses with an adapter in the middle so we can have 7/8" on each end. We have tried both of the new hoses on the water supply side and still the water pools.
Any ideas?
Can we use anything to stop the leaking?
Thanks,
Tucek