Heating element heats up about every 60 seconds. Sometimes, it goes off without the blower kicking on and other times the blower doew kick on. If the blower switch is put in the on position the blower runs just fine. Do I need to replace a sequencer?

Bad heat sequencer or blower relay is probably the cause since they control the blower in the heat mode. If you thermostat has a ON setting for the blower switch to on to get you by.

Blower doesn't kick on but heating element gets red I've replaced every component posible related to the blower and nothing please help

How and where on line can I actully see the wiring in the control panel and wiring hornice

Where on line can I actully see wiring