makocc21
Dec 30, 2009, 02:46 AM
My water well has low pressure. I have tried replacing the pressure switch with a 60-80 and turned the screws down as far as they go. My pump will kick on at about 50 and kick off at about 70. Even when the pressure reads 70, the pressure inside the house is low. I have a water treatment system which I have been told will effect pressure. Also, if I run a lot of water at one time, the pressure will zero out and my water will stop flowing till I stop running water and let the pressure build up again. I have been told that I have a sand well and I am depleting the water at the bottom of the well and have to wait till it fills up again. Any suggestions on how to improve the pressure and or continuous water flow?