I am trying to install a T104R timer to my outside pool and 3 outlets
There is 3 conduts going into the box one is from the breaker box (pool ) other two have two wires each both outlets How would the timer be hooked up .

Thanks

Tom

We need to know exact details of the wiring you have.

The timer you have needs 240 volts for the timer motor, and can switch a 240 volt load.

http://www.intermatic.com/~/media/files/intermatic/products/instructions/timers/t104%20-%20english.ashx

I suspect you have a 240 volt pump motor, which this timer can control.

Until you give more detail, I am only guessing.

Then you mention "outlets". This timer cannot control those outlets, as they will be served by a different circuit than the pump motor.

Need more detail.