I am new to this DSC PC1832 panel. Once wireing the Keypad I found myself with 2 sets of wires of 4c22AWG. I found out that the extra wire was coming from the front door contact which I only used two for the door contact and as the manual says to wire one at the B terminal and the other to the P/Z on the keypad to get the extra ZONE. I did this with the AC and the DC already powered. I did not get an extra ZONE as the manual says. I am sure I did something wrong. How can I get the front door contact to work if the wires run to my keypad and make all the functions work like I would if the wire would be wired to the panel to the terminals Z1?

Thank you for the no help department. I found my own answer. I guess no one figured it out. Gee I guess I became an expert now.

Actually yes, you did. If you would like you can post how it is done so that the rest of us may know. Sorry that no one here could help you.