Log in

View Full Version : Whirlpool dishwasher


daca
Oct 31, 2009, 04:43 AM
Pressed the delay button by mistake, how can I cancel it and wash my plates?

KUXJ
Oct 31, 2009, 05:09 AM
Hi! daca, welcome to AMHD :)


pressed the delay button by mistake, how can i cancel it and wash my plates?
This is one way, if you have a cancel/drain, start/resume button.
Can you get the Serial # of washer?

Delay start
Select this option to run your dishwasher at a later time or during
off-peak hours. You can add items to the load anytime during the
delay countdown. After adding items, close the door firmly until it
latches. The delay countdown will not continue if the door is not
latched. Press START/RESUME. If the door is unlatched, the
Start/Resume indicator flashes. The delay countdown stops until
you latch the door and press START/RESUME.
To delay the start
1. Press DELAY for a 4-hour delay. The number above or to the
left of the 4 Hour Delay pad glows.
2. Select a wash cycle and option or skip to Step 3 to use the
cycle and options selected for last cycle.
3. Press START/RESUME. (The door must be closed.) The delay
countdown starts, and the cycle will begin after 4 hours.

NOTES:
• To cancel the delay and cycle, press CANCEL/DRAIN.
• To cancel the delay and start the cycle, press START/
RESUME.