Have a insulated window that has fogged up... between the 2 panes of glass.

Changed 6 windows approx 5 years ago, this is the only one that has done this.
It is on the north side, along with 3 others. (Louisiana)

Besides replacement, any ideas how to clean this ?

How does this happen...
I thought this was sealed and nothing could get between the panes.

Danna

When this happened to me I was advised that my only choice was to remove and replace the sliding doors. I have no idea what causes this other than age.

I found a process on the Internet where the seal is removed, air is removed, the door is resealed but it was prohibitively expensive. It was less expense to remove the doors and replace them - even though that required that they be reframed.

Thanks...

By any chance is there a warranty on your windows? (My door was outside the warranty which, as I recall, was 10 years.)

Judy is right and many thermopanes have up to a 25 year warranty. There is a company or two who claim they can repair them but check out the warranty approach first. “Get the Fog Out” of Thermopane Windows at Home Ray Sands Glass Blog (http://raysands.wordpress.com/2008/09/10/get-the-fog-out-of-thermopane-windows-at-home/)

If the sash can be dissembled a glass shop can replace the glass. Special order.

When this happened to me I was advised that my only choice was to remove and replace the sliding doors. I have no idea what causes this other than age.

I found a process on the Internet where the seal is removed, air is removed, the door is resealed but it was prohibitively expensive. It was less expense to remove the doors and replace them - even though that required that they be reframed.

Since we are not talking about doors but windows lets get to the bottom of it.

Double pane windows are done with a black resin called butal between
Your only fix is to order another set

since we are not talking about doors but windows lets get to the bottom of it.

double pane windows are done with a black resin called butal between
your only fix is to order another set


I'm sorry? It's not the same process, two panes of glass with either low pressure gas or a vacuum between them?

Butal is also a medication used to treat migraines - please post your source about the windows. I can't find the info.

I realize you are angry with me but that's no reason to post incorrect info. Did you go to the site that was posted and read what was there?

[QUOTE=JudyKayTee;2041158]I'm sorry? It's not the same process, two panes of glass with either low pressure gas or a vacuum between them?

Butal is also a medication used to treat migraines - please post your source.

Danny, I realize you are angry with me but that's no reason to post incorrect info just to have something to say back at me. https://www.askmehelpdesk.com/other-member-discussions/history-amhd-375636-4.html#post1994713

Still want to know how your membership is going?

Butyl rubber is used to seal out water and moisture, sounds like Butal but very much different. Thermopanee windows and/or doors can be repaired but glass dealers do not all do this work so its spotty. Most folks replace, sometimes under warranty.

Hi, I work in a glass shop, and we change these panes out all the time. Since the unit has failed, take the sash to your local glass shop, they will measure the size and overall thickness, and whether it has low-E glass or not. You than can take the sash back home an reinstall, until the new pane comes in. It takes us about a week to get the new pane back.

Hi, I work in a glass shop, and we change these panes out all the time. Since the unit has failed, take the sash to your local glass shop, they will measure the size and overall thickness, and whether it has low-E glass or not. You than can take the sash back home an reinstall, til the new pane comes in. It takes us about a week to get the new pane back.



How do you remove the air and seal the window between the two "layers"?

Judy, I think scoooteris talking about a completely new thermopane getting install in the old sash. My link 3 is a company who claims they pump out the air, inject a gas, install some little vale and bingo, good as new. I have never persopnally used them

If you have condensation between the glass then you need new glass. They didn't seal it right at the factory, it happens all the time. If you don't know who the contractor was that installed the windows, pull down the top sash and see if there's a sticker up there. It should say the manufacturers name. Call them up and give them the numbers on the sticker, it might still be covered, if not you can probably get a replacement that'll fit.

Judy, I think scoooteris talking about a completely new thermopane getting install in the old sash. My link 3 is a company who claims they pump out the air, inject a gas, install some little vale and bingo, good as new. i have never persopnally used them

That is correct, that we change the whole insulated unit out. Most of the units we see come in that have failed look next to impossible to repair, since they have been failed for quite sometime and the mineral build up is pretty heavy.

That is correct, that we change the whole insulated unit out. Most of the units we see come in that have failed look next to impossible to repair, since they have been failed for quite sometime and the mineral build up is pretty heavy.


Right - the question was how to clear it up without replacing it and I thought that's what you were addressing.

Sorry.

Thanks for all replies.

DAMN! Nobody seems to know the fix for the fogged up windows.. I've been searching this all morning long, with no success in finding an answer. After much frustration, it all of a sudden came to me. It's as if a light turned on in my head. Now even though I could charge folks for this information, I won't. Here's the #1 answer.. Let the kids have some good ole batting practice, hitting the ball "towards" the house (window). It won't take long before you can, call your Insurance Company.. Problem Solved.. lol, lol... Just kidding..

I THINK I'LL JUST LIVE WITH THE FOGGED UP WINDOWS..