I have had this Whirlpool for about 6 years, so of course my warranty has run out. We just moved into our first home (Not renting anymore!) and installed our machine. It worked fine for the first month no problems, by the way I've never had a problem with my machine before now. It runs fine, but lately (the past couple of months) it starts to beep - even when the "no sound" is selected it beeps constantly, while it's running and even when it's not running. We cannot figure out why it's beeping. At one point we did get a flash of "PF" and looked it up - it was a Power failure so we reset it like the trouble shooting guide told us, but it continues to beep. Now we cannot change the function from perm press to Normal or change any of the other functions, while it's plugged in, and of course when we unplug it there's no power to change the options. It's basically stuck in motion and beeps constantly. I don't get an E1 or E2 code I just get beeping. However annoying this may be our cloths do come out dry. Oh, we did have to change the electrical cord to fit the outlet when we moved. I don't know if that will help... but I could really use some insight on this if anyone has an idea of the problem. The beeping is driving me crazy.
Thanks for your help.