Log in

View Full Version : Shower stall install


ewwoodyard344
Oct 16, 2009, 02:52 PM
What needs to be put under the bottom of a one piece fiberglass shower stall when installing, to make it solid

xcountry292
Oct 16, 2009, 05:16 PM
I lay down a piece of tar paper on the floor then mix up a 40 lb bag of mason mix. Mound it high in a circle around the drain hole, then set the shower into this mix. Good luck

speedball1
Oct 17, 2009, 04:12 AM
I agree with Country. This is called "bedding the shower floor." Good luck, Tom