Log in

View Full Version : My kenmore built in dishwasher the green clean light flashes and won't let me turn on


chester66
Sep 22, 2009, 02:46 PM
The green clean light keeps flashing not allowing me to do a load of dishes so won't turn on tried tripping the breaker nothing still just keeps flashing

chester66
Sep 22, 2009, 02:52 PM
I even tried tripping the breaker but the green light still keeps flashing and not allowing me to do a load of dishes

scott046
Nov 17, 2012, 04:49 AM
YES - Success - Alternate between the two buttons - Heated Dry and high temp - with the door open, start by pressing the Heated Dry once and then the High Temp button once and continue to alternated between the two until all the lights light up on the control board - then close the door and make sure it latches shut - - then hit the cancel button and all light should clear off - the unit is reset and should operate as normal