Woodbob
Sep 17, 2009, 05:40 AM
Hi,
Have a small basement washroom, cement floor, approx. 80 sq. ft. Washer, Dryer, Sink, Toilet.
Want to tile the floor. Thinking of the following:
6 Mil. Poly on floor.
5/4 x 4” ( 1.0”) floating risers, on top of poly
¾” Plywood on risers
¼” Cement backer, over plywood
Tile
I believe the total height of this floor is 2 ¼” . The rest of the finished basement flooring height is 2” and I can live with this.
Questions:
Will this setup work, no cracking of tile or grout?
The risers would Float and not be screwed to the cement
OR
Should I forget the tile and go to a laminate floor?
Thanks
Have a small basement washroom, cement floor, approx. 80 sq. ft. Washer, Dryer, Sink, Toilet.
Want to tile the floor. Thinking of the following:
6 Mil. Poly on floor.
5/4 x 4” ( 1.0”) floating risers, on top of poly
¾” Plywood on risers
¼” Cement backer, over plywood
Tile
I believe the total height of this floor is 2 ¼” . The rest of the finished basement flooring height is 2” and I can live with this.
Questions:
Will this setup work, no cracking of tile or grout?
The risers would Float and not be screwed to the cement
OR
Should I forget the tile and go to a laminate floor?
Thanks