Log in

View Full Version : John deere L120


mdj577
Sep 7, 2009, 10:22 AM
Engine stalls as soon as mower deck is engaged. Any suggestions?

Thanks in advance.

crigby
Sep 7, 2009, 11:14 AM
Hi,
Some of the L120/L130s were susceptible to wiring harness damage. In rare occasions it is near the PTO clutch plug. Most often it is somewhere along the right side of the frame in what is called the rear harness (it is the part going to the seat switch.) Check those wires for damage/breakage.
Peace,
Clarke

mdj577
Sep 7, 2009, 07:17 PM
Hi,
Some of the L120/L130s were susceptible to wiring harness damage. In rare occasions it is near the PTO clutch plug. Most often it is somewhere along the right side of the frame in what is called the rear harness (it is the part going to the seat switch.) Check those wires for damage/breakage.
Peace,
Clarke

Thanks! Found the problem. Was loose plug at theseat switch.