:confused:how do you use the fasteners with the fence weave

Want to tell us more? What do you mean by the fence weave?

Fence Weave (name brand) are plastic slats about 2 inches wide that you weave-in-and-out through your chain link fence. Its used, say, if you don't want people looking in your yard or to block out seeing your neighbors yard. Theyalso come in different colors. I use it to block weeds/ plus seeing it from an empty lot next door. Hope this kind of gives you an idea what it is. Fasteners are included when you buy it but I was given the weave and did not get any. It is used so the plastic doesn't slip down through the chain link to the ground. (I think) But I'm not exactly sure on how to fasten it to the fence.
Welcome any help I can get! Thanks

OK, now I know what you are referring to but have no first hand experience with it. What do the fasteners look like?

I'm not exactly sure how to describe them. Remember hole fasteners for 3-holed paper, where you put through hole and then separate ends in opposite directions? That's them. You can go to eBay and type in privacy weave and then you will know.
Sandy

First understand that I am not personally familiar with these. Second I can not see the details of the fasteners.

It appear to me that if the weave is solid material they should have holes in them. If not you will have to make holes. You would spread the legs of the fastener apart so they go over the wire. Then push them through the hole and spread them apart. Just like you did when put them through the hole in the paper.

If the weave is fabric you can probably just push them through the fabric.

Thank you Thank you sooo very much!
BodfishASandy

Now all I need now is the fasteners. Lol

Harold - Do you know anything about swamp coolers?