View Full Version : The drive belt routing for a john deere 175 hydro
topherjn88
Aug 5, 2009, 11:27 AM
I need a picture of the drive belt off a 175 john deere hydro, my belt blew-out so I have no image of original routing, I bought a new belt and managed to fit it in and around both the tranny an the driving pulley. But I can't manage to figure out the routing around the guide and idler pulleys positioned near the middle under the tractor. I am stuck and would appreciate any help but a picture would be the best help for me.
-thank you!
topherjn88
Aug 5, 2009, 11:46 AM
Never mind I found a solution if you are in the same boat check this website out, it solved all my questions <http://outdoorpowerinfo.com/repairs/deere_175_drive_belt.asp>
nathan81
Jul 19, 2010, 08:08 AM
This doesn't look like my 175 hydro at all
crigby
Jul 19, 2010, 11:14 AM
Hi,
Do you have one of the rare Kanzaki(TuffTorq) transaxles? Only the last production used them. Everything before used a mating of an Eaton pump/motor assembly to a Peerless transaxle/differential. That is what that link covers.
If this is the case a bad picture is attached; the dashed line is the belt.
Peace,
Clarke