bodecki86
Aug 4, 2009, 11:08 AM
I have old GE furnace (gas/central model 21LU105D2M1) with 2-speed blower fan (blue,red & white wires)
Heating work good, low speed first & after warm up hi speed.
Problem is with A/C. Seems like its work always on low speed.
I try to take out red and blue wire from relay, and put blue wire where red was (red was not connected). A/C and blower start for a second and stop. I try again - was the same.
Then I connect everything how use to be and it work.
What can I do to make blower motor work on hi speed with my 16 years old FEDDERS A/C?
On low speed air flow is to weak to cool down 2nd (top) floor.
Maybe somebody have wiring diagram for my old GE furnace?
TX.
Heating work good, low speed first & after warm up hi speed.
Problem is with A/C. Seems like its work always on low speed.
I try to take out red and blue wire from relay, and put blue wire where red was (red was not connected). A/C and blower start for a second and stop. I try again - was the same.
Then I connect everything how use to be and it work.
What can I do to make blower motor work on hi speed with my 16 years old FEDDERS A/C?
On low speed air flow is to weak to cool down 2nd (top) floor.
Maybe somebody have wiring diagram for my old GE furnace?
TX.