spikesimpson
Jul 10, 2009, 09:57 PM
I'm trying replace janitrol 18-60 thermostat with ritetemp 6022 .
System is 2 stage heatpump w/strip back-up
Janitrol inside has 2 mercury switches and wires configured like this:
Y G R O
W2
E C
W2 is white wire
E is Black wire
C is Blue wire
Y-yellow wire
G-green wire
R-red wire
O-orange wire
3 switches heat/cool,fan/auto, emergency switch/ normal
Ritetemp terminals:
C B O W2 W Y Y2 RH RC G A
Can you connect the dots for me?
No E in BLack, no C in BLue
System is 2 stage heatpump w/strip back-up
Janitrol inside has 2 mercury switches and wires configured like this:
Y G R O
W2
E C
W2 is white wire
E is Black wire
C is Blue wire
Y-yellow wire
G-green wire
R-red wire
O-orange wire
3 switches heat/cool,fan/auto, emergency switch/ normal
Ritetemp terminals:
C B O W2 W Y Y2 RH RC G A
Can you connect the dots for me?
No E in BLack, no C in BLue