Has anyone had any problems with the sleep number bed motor or remote? We purchased ours in September of 2006. Had problems with the sides of the bed breaking down and still do. Now the remotes stopped working. They tell us it is the motor and remotes. Amazing how both remotes and motors go out at the same time. Cost to us is $450 dollars. After paying $5000 plus for this worthless bed, I don't think I want to spend anymore money on it. The best thing about it was that you could raise the bed to watch TV. I never could find a number that worked for me. Does anyone know if there are other options for buying this motor and remote?

I've had the Same problems - cannot get air into the mattress and I have messed with it endlessly. I have combed the internet trying to find a new air compressor/motor ** there is NOTHING!
What a colossal waste of money and my back is killing me!

Sleep Number has several Problems, hopefully not as bad as this Guys, will try to find additional info, until then:
YouTube - RossHead - Sleep Number Bed Problem (http://www.youtube.com/watch?v=3moeD2KcK-w)

This Guy has other issues as well:
http://www.youtube.com/watch?v=Igwmw0SctT4&feature=related

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150466012316&rvr_id=145636164280&crlp=1_263602_263622&UA=WVI8&GUID=6029a5311250a0b583b18771ffdfd82f&itemid=150466012316%24&ff4=263602_263622

The Motor and remotes do not go out at the same time.
Unlikely, but I suppose the remote could break causing the motor to continually run, and harming motor. I would think it has limits.

Our sleepnumber bed has stopped working on one side only. Bad remote? The backlight comes on, but all we ever see are 2 dashes. It can't detect the current number, and up/down don't do anything

We the same issue, all working yesterday and this morning I tried to use my control, but no display. My wife's display is on but showing two broken lines we can't do anything or adjust anything on either of the two control units.?

We have a similar issue. Our remotes are wired controls, but one side only displays the dashes, the other side works fine. Can one get a replacement wired control?