I was driving when my 92 accord all of the sudden stalled out on me. It hesistated first and then just died. I tried to start it and it wouldn't start. I towed it back home and then saw that the spark plug holes had oil in them. I cleaned out the oil and the ends of the wires, checked the spark plugs(fine). Put all back and still didn't start. I check the main relay and it is also fine. I am starting to think that it might be the icm. How do I remove the ICM? Do I remove the 2 screws on the bottom and then it will pull out and then I can remove from the heat sink? Thanks. If it sounds like maybe something else please share.

Thank you

Ryan

. Replace the ICM and coil:

https://www.askmehelpdesk.com/cars-trucks/faq-how-troubleshoot-repair-maintain-hondas-selected-other-vehicles-46563-4.html#post265896

. Install new spark plug seals and rubber cylinder head cover seal.