88crxdx
May 27, 2009, 12:36 AM
Ok guys, I am stumped! I have not been able to get my car started. I am running a CRX DX that I have converted the entire wiring harness to a 91 CRX Si. I have tested my main relay, my harness, have measured the voltage that my MAP is putting out (K-Test) both at the MAP sensor, as well as the corresponding pins at the ECU with correct voltage, and still nothing! The only way I can get my fuel pump to kick in is by jumping the main relay harness at 5 and 7. I have checked every fuse in the car for continuity, and have triple-checked all of my grounds. Any suggestions?