AlexandraB
Apr 2, 2009, 01:35 PM
Hi,
I removed the toilet and floor of one of my 1952 house's bathroom. I retiled it but now the flange is 1/4' too high. The tube is metal concrete slab poured over it. It was higher before I put a wood panel over the flange and hammered it down. I thought it would slide inside the metal tube but did not.Instead it flattened it. What can I do to replace it or fix it without destroying the floor.
I removed the toilet and floor of one of my 1952 house's bathroom. I retiled it but now the flange is 1/4' too high. The tube is metal concrete slab poured over it. It was higher before I put a wood panel over the flange and hammered it down. I thought it would slide inside the metal tube but did not.Instead it flattened it. What can I do to replace it or fix it without destroying the floor.