Sorry if this question has been asked previously, but I would like to know how to connect my JVC combo DVD/VCR unit to my Sony 32in Bravia HD TV. As it is now, I cannot view the VCR portion (using "video 1") channel. I can hear the VCR but cannot "see" any picture (snow). Thanks for any assistance - DocB

Here's the Manual, Try a different input/cable type:
http://www.sonystyle.com/wcsstore/SonyStyleStorefrontAssetStore/pdf/KDL32M3000.pdf
Take a look at page 13 and 14.

That portion of page 13 that indicates side screen connections looks like the key to the problem. I'll try that when I get home, thanks.DocB

Looks like the side input is Input 2.

Yep, I'll try that solution in about two hours, thanks. DocB

Here's the Manual, Try a different input/cable type:
http://www.sonystyle.com/wcsstore/SonyStyleStorefrontAssetStore/pdf/KDL32M3000.pdf
Take a look at page 13 and 14.

Hi Strat: This solution did not work. I get "snow" (no picture) but sound is good. Should I try something else? :confused:DocB

Just need to be sur you have a good video out, then you need a good cable and hook to a known good input, and be selected on correct input.
Using S- video? Composite, component? What are you currently trying?