whisky4
Dec 29, 2008, 08:05 PM
Hi,I got the nut loose by taking a chisel and cutting the plastic nut like you would do with a
Steel nut,then I was able to take all of the drain apart,then I put a new drain back in,but now
It has a small leak,this drain has a rubber sleeve that goes around the abs pipe.
My question now is do I need to tighten the sleeve more as there is a piece that screws down
Against the rubber sleeve,also used plumbers putty or should I have used silicone instead.
Thank,s
Steel nut,then I was able to take all of the drain apart,then I put a new drain back in,but now
It has a small leak,this drain has a rubber sleeve that goes around the abs pipe.
My question now is do I need to tighten the sleeve more as there is a piece that screws down
Against the rubber sleeve,also used plumbers putty or should I have used silicone instead.
Thank,s