I hve recently finnished my basement i'm havein a problem with my highhats i was ringing out in mypannel and found that the buzzer in my fluke picks up voltage on neutral to ground on different circits but there is no voltage there but the buzzer buzzes like there is and it changes when different lights on different lines are on never had this problem before sometimes it is fine nothing trips evrything works fine... i am using forresint bulbs for the first time could it be residual from them

Please provide the model number of the Fluke instrument, and which setting are you using. I need to understand what you are using to test to be able to understand what you are testing and the results.

Please explain how you get voltage on neutral to ground on different circuits?

Where are you located?

What is the mains voltage?

Suggestion:

Please make absolutely certain that your meter is set to read AC voltage and not OHMS.

All of the Fluke meters I have ever used "Beeped" to warn the user that there is a zero Ohms (short) condition present. Then the "0" is posted to the LCD.