New hampton fan, looks great , light works, but has one speed SLOW...
I can feel power to the motor at the speed positions,but fan only appears to run at low... any ideas..? Thanks

How is the fan controlled, a remote, wall control, or pullchain?

Thanks, it is a pullchain.. with wall switch , 1 for fan, 1 for light
Thanks
dodgertown

Ok, that is the problem. If you're going to control the fan with the wall switch, make sure you have the pullchain set to high.

Thanks, still no dice.. my bad , was working OK at slow speed.. pulled chain to speed up.. now.. motor, you can feel power, but barely moves with wall switch on and high speed, then stops after a couple minutes..?

Ok, with both the pullchain and wall control set to high, how does the fan behave?

Try bypassing the wall control.

Sorry, the wall control is just an on off switch... no speed control
Thanks

What was installed in place of the fan, and did that work OK?

Ok presumably something is wrong with your fan. Most likely, since the fan is new, a bad connection. You should take it back.

Thanks much, I had another fan there befiore.. yea, I think I just got a bad one...

Let us know when you get it (a new one) working :)