View Full Version : Whirlpool dishwasher just quit
bobmc
Nov 11, 2008, 09:52 AM
I have a whirlpool dishwasherquiet partner 11`... just quit as if it lost a power sourse.. I have tested the power connection and it does have live power there... was wondering if there is a fuse somewhere.. thanks bob in Oklahoma McCandlish Livestock (http://www.mccandlishlivestock.com) :)
drcool299
Nov 12, 2008, 12:32 AM
These dishwasher have ceramic fuses or glass fuses in their PC boards. Please open up the unit and check the fuses on the board. It could have snap due to an overload of motor, heater or solenoid or could have just snapped because of a spike in your power.
Tnx
Drcool:)
bobmc
Nov 12, 2008, 02:24 AM
Thanks, is this in the door or where would I look for these fuses? Thanks again bob
drcool299
Nov 12, 2008, 09:53 AM
It is inside the door. You have to open it up, remove the cover of the door and remove the cover of the PC board. From there you can remove the board and test the fuse.
Remember to unplug the unit first before servicing.
Tnx again,
Drcool :)